diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index 11c55fd..55e3fa0 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -937,6 +937,54 @@
 
 
 
+Entry: x86-reset16: x86 16-bit reset code for U-Boot
+----------------------------------------------------
+
+Properties / Entry arguments:
+    - filename: Filename of u-boot-x86-reset16.bin (default
+        'u-boot-x86-reset16.bin')
+
+x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code
+must be placed at a particular address. This entry holds that code. It is
+typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible
+for jumping to the x86-start16 code, which continues execution.
+
+For 64-bit U-Boot, the 'x86_reset16_spl' entry type is used instead.
+
+
+
+Entry: x86-reset16-spl: x86 16-bit reset code for U-Boot
+--------------------------------------------------------
+
+Properties / Entry arguments:
+    - filename: Filename of u-boot-x86-reset16.bin (default
+        'u-boot-x86-reset16.bin')
+
+x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code
+must be placed at a particular address. This entry holds that code. It is
+typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible
+for jumping to the x86-start16 code, which continues execution.
+
+For 32-bit U-Boot, the 'x86_reset_spl' entry type is used instead.
+
+
+
+Entry: x86-reset16-tpl: x86 16-bit reset code for U-Boot
+--------------------------------------------------------
+
+Properties / Entry arguments:
+    - filename: Filename of u-boot-x86-reset16.bin (default
+        'u-boot-x86-reset16.bin')
+
+x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code
+must be placed at a particular address. This entry holds that code. It is
+typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible
+for jumping to the x86-start16 code, which continues execution.
+
+For 32-bit U-Boot, the 'x86_reset_tpl' entry type is used instead.
+
+
+
 Entry: x86-start16: x86 16-bit start-up code for U-Boot
 -------------------------------------------------------
 
diff --git a/tools/binman/etype/x86_reset16.py b/tools/binman/etype/x86_reset16.py
new file mode 100644
index 0000000..54eb814
--- /dev/null
+++ b/tools/binman/etype/x86_reset16.py
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for the 16-bit x86 reset code for U-Boot
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_x86_reset16(Entry_blob):
+    """x86 16-bit reset code for U-Boot
+
+    Properties / Entry arguments:
+        - filename: Filename of u-boot-x86-reset16.bin (default
+            'u-boot-x86-reset16.bin')
+
+    x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code
+    must be placed at a particular address. This entry holds that code. It is
+    typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible
+    for jumping to the x86-start16 code, which continues execution.
+
+    For 64-bit U-Boot, the 'x86_reset16_spl' entry type is used instead.
+    """
+    def __init__(self, section, etype, node):
+        Entry_blob.__init__(self, section, etype, node)
+
+    def GetDefaultFilename(self):
+        return 'u-boot-x86-reset16.bin'
diff --git a/tools/binman/etype/x86_reset16_spl.py b/tools/binman/etype/x86_reset16_spl.py
new file mode 100644
index 0000000..699a0c6
--- /dev/null
+++ b/tools/binman/etype/x86_reset16_spl.py
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for the 16-bit x86 reset code for U-Boot
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_x86_reset16_spl(Entry_blob):
+    """x86 16-bit reset code for U-Boot
+
+    Properties / Entry arguments:
+        - filename: Filename of u-boot-x86-reset16.bin (default
+            'u-boot-x86-reset16.bin')
+
+    x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code
+    must be placed at a particular address. This entry holds that code. It is
+    typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible
+    for jumping to the x86-start16 code, which continues execution.
+
+    For 32-bit U-Boot, the 'x86_reset_spl' entry type is used instead.
+    """
+    def __init__(self, section, etype, node):
+        Entry_blob.__init__(self, section, etype, node)
+
+    def GetDefaultFilename(self):
+        return 'spl/u-boot-x86-reset16-spl.bin'
diff --git a/tools/binman/etype/x86_reset16_tpl.py b/tools/binman/etype/x86_reset16_tpl.py
new file mode 100644
index 0000000..4eedb8d
--- /dev/null
+++ b/tools/binman/etype/x86_reset16_tpl.py
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for the 16-bit x86 reset code for U-Boot
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_x86_reset16_tpl(Entry_blob):
+    """x86 16-bit reset code for U-Boot
+
+    Properties / Entry arguments:
+        - filename: Filename of u-boot-x86-reset16.bin (default
+            'u-boot-x86-reset16.bin')
+
+    x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code
+    must be placed at a particular address. This entry holds that code. It is
+    typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible
+    for jumping to the x86-start16 code, which continues execution.
+
+    For 32-bit U-Boot, the 'x86_reset_tpl' entry type is used instead.
+    """
+    def __init__(self, section, etype, node):
+        Entry_blob.__init__(self, section, etype, node)
+
+    def GetDefaultFilename(self):
+        return 'tpl/u-boot-x86-reset16-tpl.bin'
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index acf361f..7744581 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -49,6 +49,9 @@
 X86_START16_DATA      = b'start16'
 X86_START16_SPL_DATA  = b'start16spl'
 X86_START16_TPL_DATA  = b'start16tpl'
+X86_RESET16_DATA      = b'reset16'
+X86_RESET16_SPL_DATA  = b'reset16spl'
+X86_RESET16_TPL_DATA  = b'reset16tpl'
 PPC_MPC85XX_BR_DATA   = b'ppcmpc85xxbr'
 U_BOOT_NODTB_DATA     = b'nodtb with microcode pointer somewhere in here'
 U_BOOT_SPL_NODTB_DATA = b'splnodtb with microcode pointer somewhere in here'
@@ -114,12 +117,22 @@
         TestFunctional._MakeInputFile('me.bin', ME_DATA)
         TestFunctional._MakeInputFile('vga.bin', VGA_DATA)
         cls._ResetDtbs()
-        TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA)
+
         TestFunctional._MakeInputFile('u-boot-br.bin', PPC_MPC85XX_BR_DATA)
+
+        TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA)
         TestFunctional._MakeInputFile('spl/u-boot-x86-16bit-spl.bin',
                                       X86_START16_SPL_DATA)
         TestFunctional._MakeInputFile('tpl/u-boot-x86-16bit-tpl.bin',
                                       X86_START16_TPL_DATA)
+
+        TestFunctional._MakeInputFile('u-boot-x86-reset16.bin',
+                                      X86_RESET16_DATA)
+        TestFunctional._MakeInputFile('spl/u-boot-x86-reset16-spl.bin',
+                                      X86_RESET16_SPL_DATA)
+        TestFunctional._MakeInputFile('tpl/u-boot-x86-reset16-tpl.bin',
+                                      X86_RESET16_TPL_DATA)
+
         TestFunctional._MakeInputFile('u-boot-nodtb.bin', U_BOOT_NODTB_DATA)
         TestFunctional._MakeInputFile('spl/u-boot-spl-nodtb.bin',
                                       U_BOOT_SPL_NODTB_DATA)
@@ -3236,6 +3249,21 @@
         self.assertIn('Must specify exactly one entry path to write with -f',
                       str(e.exception))
 
+    def testPackReset16(self):
+        """Test that an image with an x86 reset16 region can be created"""
+        data = self._DoReadFile('144_x86_reset16.dts')
+        self.assertEqual(X86_RESET16_DATA, data[:len(X86_RESET16_DATA)])
+
+    def testPackReset16Spl(self):
+        """Test that an image with an x86 reset16-spl region can be created"""
+        data = self._DoReadFile('145_x86_reset16_spl.dts')
+        self.assertEqual(X86_RESET16_SPL_DATA, data[:len(X86_RESET16_SPL_DATA)])
+
+    def testPackReset16Tpl(self):
+        """Test that an image with an x86 reset16-tpl region can be created"""
+        data = self._DoReadFile('146_x86_reset16_tpl.dts')
+        self.assertEqual(X86_RESET16_TPL_DATA, data[:len(X86_RESET16_TPL_DATA)])
+
 
 if __name__ == "__main__":
     unittest.main()
diff --git a/tools/binman/test/144_x86_reset16.dts b/tools/binman/test/144_x86_reset16.dts
new file mode 100644
index 0000000..ba90333
--- /dev/null
+++ b/tools/binman/test/144_x86_reset16.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		size = <16>;
+
+		x86-reset16 {
+		};
+	};
+};
diff --git a/tools/binman/test/145_x86_reset16_spl.dts b/tools/binman/test/145_x86_reset16_spl.dts
new file mode 100644
index 0000000..cc8d97a
--- /dev/null
+++ b/tools/binman/test/145_x86_reset16_spl.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		size = <16>;
+
+		x86-reset16-spl {
+		};
+	};
+};
diff --git a/tools/binman/test/146_x86_reset16_tpl.dts b/tools/binman/test/146_x86_reset16_tpl.dts
new file mode 100644
index 0000000..041b16f
--- /dev/null
+++ b/tools/binman/test/146_x86_reset16_tpl.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		size = <16>;
+
+		x86-reset16-tpl {
+		};
+	};
+};